Home / Blog

Pool Installation Costs in Sioux Falls, SD (2026 Guide)

Pool Installation Costs in Sioux Falls, SD (2026 Guide), pool installers in Sioux Falls, SD

Pool costs in Sioux Falls run from around $46,000 for a basic vinyl liner pool to $77,000 or more for concrete, with fiberglass averaging $59,000. Local soil and permit requirements add to the base price.

Typical Pool Prices in Sioux Falls

A standard inground pool in Sioux Falls typically costs between $46,000 and $77,000 for the pool itself, depending on the type you choose. Vinyl liner pools start around $46,000 to $48,000 for a basic installation. Fiberglass pools, which are faster to install and hold up well in our freeze-thaw climate, average $57,000 to $59,000. Concrete or gunite pools, which let you customize the shape and size, run around $74,000 to $77,000 or more. These are base numbers for a standard 500-square-foot pool with basic equipment and no fancy features.

The final cost depends on what you add. Decking, whether concrete or pavers, can run another $10,000 to $20,000. A heater to extend your swim season costs $3,000 to $5,000. An automatic cover adds $8,000 to $15,000. Landscaping, lighting, and a spa or water feature all push the number higher. One local builder noted that a complete backyard pool environment in Sioux Falls starts in the $150,000 to $175,000 range once you include sitework, decking, and amenities.

Prices have climbed in recent years. A few homeowners on local forums reported quotes around $35,000 to $50,000 five or six years ago, but those same pools now cost $75,000 to $90,000. Material costs, labor shortages, and demand all play a role. If budget matters, vinyl is the most affordable upfront, though the liner needs replacement every seven to ten years at $3,500 to $6,000 per swap.

What Drives the Cost Up or Down

Soil conditions in Sioux Falls add to the work. Most of the area sits on heavy clay or glacial till, which holds moisture and shifts with freeze-thaw cycles. Clay soils can require extra excavation, better drainage systems, or structural fill to keep the pool stable. If your property is near the Big Sioux River floodplain, you might deal with higher groundwater or softer alluvial soils, which can complicate the dig and raise costs.

Yard access affects the price too. If equipment has to come through a narrow side yard or over finished landscaping, expect to pay more for the extra labor and care. Existing utilities, slopes, and how far your electrical panel sits from the pool site all factor in. A flat, open backyard with good access keeps costs lower than a tight or complicated site.

Permit Fees and Inspections

The City of Sioux Falls requires a building permit for any pool deeper than 24 inches. Permit fees start at $40 but go up based on the project value. For a $60,000 pool installation, expect a permit fee in the range of $200 to $300. Your contractor usually handles the permit application, but the fee comes out of your pocket either way.

The permit process involves submitting a site plan showing the pool location, setbacks from property lines, and how it fits with existing structures. Once approved, the city requires inspections at key stages: excavation, plumbing, electrical, and final. Each inspection has to pass before you move to the next step. Budget a few extra days into your timeline for inspections and any needed corrections.

Comparing Pool Types for Sioux Falls

Vinyl liner pools are the budget choice and work fine in our climate, but the liner does not last forever. Count on replacing it every seven to ten years, which adds to long-term costs. Fiberglass pools cost more upfront but hold up well against our hard winters and need less maintenance. The smooth surface resists algae better than concrete, and the shell flexes a bit with ground movement, which helps in clay soils.

Concrete pools give you the most design freedom but take the longest to build, often three to six months from start to finish. Fiberglass installs in two to three weeks, and vinyl falls somewhere in between. If you want to swim this summer, a fiberglass pool ordered in early spring has the best shot at being ready by June. Concrete pools started in fall might be done by the following spring, which is actually a smart way to beat the rush and have the pool ready when the weather warms up.

Getting Accurate Quotes

Get at least three written quotes that break out the pool, equipment, decking, and sitework separately. Ask what the quote includes and what costs extra. Some contractors include basic coping and a small patio, while others price the pool shell alone. Make sure electrical, plumbing, and startup chemicals are spelled out.

Ask about warranty coverage. Fiberglass shells often carry a 25- to 30-year warranty on the structure, but equipment warranties are shorter. Vinyl liners typically have a prorated warranty that drops in value each year. Concrete pools may have a one-year builder warranty, with longer coverage on the plaster or finish if you pay extra. Understanding what breaks and what gets covered saves trouble down the road.

Also in our network: Artificial Turf Cost in Sioux Falls: What Homeowners Pay in 2026, Roof Replacement Cost in Sioux Falls, SD (2026 Guide).

Need pool installers in Sioux Falls or nearby?

Send us a few details and a photo and we will get you a free quote.

Get my free quote

More from our blog

More Local Pros From Our Network

Get a free quote